BLACK FRIDAY
SALE IS LIVE
50% OFF
On All ReachStream Products
Limited time · Ends Nov 30, 2026
Ends Nov 30
Written by:
Mohammed Younus
Mohammed Younus

How Accurate Is Catch-All Verification? Our Test Results

How to Evaluate B2B Data Vendors for Accuracy and Compliance

Key takeaways lightning icon
TL;DR

Introduction

Every email verifier publishes an accuracy number. Few explain how that number was reached, or why catch-all addresses make the math harder than valid and invalid ones.

This guide walks through how an email verification accuracy test actually works, why catch-all domains resist a clean score, and what ReachStream’s own published figures do and do not cover.

Why This Guide Exists

Every email verifier publishes an accuracy number. Few explain how that number was reached, or why catch-all addresses make the math harder than valid and invalid ones.

How an Email Verification Accuracy Test Works

An email verification accuracy test compares a verifier’s output against a known, confirmed outcome for each address. That confirmed outcome is the ground truth.

Building ground truth usually means an actual delivery test, a confirmed inbox, or a prior relationship with the contact. Without it, there is nothing to score the verifier’s result against.

Sample size matters here too. A test run on a few hundred addresses tells you far less than one run across a sample large enough to cover different providers, domain sizes, and verification statuses.

A single email verification accuracy figure is an average across every status a verifier returns, not just the easy ones. ReachStream Email Verifier publishes 99.8% verification accuracy across all checks, based on SMTP-level validation in real time. No message is ever sent to the address during the check itself. That figure is an aggregate, not a separate, published catch-all-specific study.

Catch-All Verification Accuracy: Why This Status Is Different

Catch-all verification accuracy is harder to pin down than valid or invalid accuracy. The mail server accepts the message regardless of whether a real mailbox exists, so a single automated check cannot confirm a human on the other end.

A live SMTP test can confirm the server’s acceptance. It cannot confirm delivery to a specific person without a real send or an existing relationship with that contact. This is why catch-all cannot be scored the same way as a normal address.

A catch-all email accuracy test runs into contested addresses almost immediately. Some catch-all mailboxes are read daily by a real person. Others sit unread for years. Multi-attempt verification helps here. Retrying complex or slow-to-respond domains reduces false negatives, and that retry step is part of how ReachStream Email Verifier handles catch-all and risky domains before any manual review.

How Accurate Is Email Verification, Really?

How accurate is email verification once you separate the easy statuses from the hard ones? Valid and invalid results tend to track closely with real outcomes. Catch-all, risky, and unknown results do not behave the same way.

That gap is exactly why ReachStream’s Catch-All Resolver exists as a separate, deeper pass rather than folding catch-all into the same flat accuracy number as everything else. Any honest email verification accuracy test should draw that same line.

Email Verifier Accuracy Test: What a Rigorous One Measures

A proper email verifier accuracy test reports more than one number. Coverage rate shows how many addresses got a confident status at all. Unknown rate shows how many did not.

Per-address accuracy, broken out by status, tells a very different story than one blended total. A verifier can score well on an accuracy test overall while still struggling on catch-all addresses specifically.

Email Verification Benchmark Methodology: The Pieces That Matter

A credible email verification benchmark methodology names its sample size. It states how ground truth was confirmed, and it reports false positive and false negative rates separately rather than one combined error figure.

Without those pieces, an email verification accuracy test is just a headline number. Reproducible methodology matters just as much as the result. A number nobody else can check is a claim, not a finding.

A Number Nobody Can Check Is a Claim, Not a Finding

Reproducible methodology matters just as much as the result. Without a disclosed sample size, ground truth method, and separate error rates, an accuracy figure is just a headline number.

See the Catch-All Resolver in Action

A headline accuracy number will not tell you how catch-all addresses on your own list are likely to behave. The Catch-All Resolver runs a deeper check and returns a likely deliverable or likely invalid verdict instead.

False Valid, False Invalid: The Two Ways a Test Can Be Wrong

False valid and false invalid are the two ways any accuracy number can be wrong. A false valid happens when a verifier says an address is good, but it bounces or never reaches a real inbox, which wastes a send and risks sender reputation.

A false invalid happens the opposite way. A real address gets flagged as bad and dropped from the list for no reason, throwing away a real contact.

Trying to score accept-all emails the same way you would a normal address runs into the same wall every time. The server accepts the message either way, so pass-or-fail testing alone cannot settle the question. That is exactly why a resolver-style deeper check, rather than a single automated ping, is the more honest approach to this specific status.

Two Different Costs, Not One Error Rate

A false valid wastes a send and risks sender reputation. A false invalid throws away a real contact. Treating them as a single combined error rate hides which mistake a verifier is actually making.

Metric What It Shows Why It Matters
Sample size
How many addresses were tested.
Small samples do not generalize across providers or regions.
Ground truth method
How each confirmed outcome was established.
Without it there is nothing to score the verifier against.
Per-status accuracy
Accuracy broken out by status, not blended.
A high overall score can hide a weak status like catch-all.
Coverage rate
How many addresses got a confident status at all.
Low coverage means more unresolved results, not fewer problems.
False positive rate
How often a bad address was marked good.
Wastes a send and risks sender reputation.
False negative rate
How often a good address was marked bad.
Throws away a real, reachable contact.
Catch-all handling
Whether catch-all got its own pass or was folded into the total.
A resolver pass is more honest than one flat number.

Catch-All Email Verifier Comparison: Why Benchmarks Vary So Much

Comparing tools across different providers will show different numbers, often because each one defines its own ground truth and tests its own sample. Published figures from different vendors are rarely built the same way.

That does not make every number meaningless. It means a reader should ask how a figure was produced, and what a benchmark actually measured, before treating it as comparable to another vendor’s claim.

Ask How the Number Was Produced

A higher published figure does not automatically mean a better tool. It means a reader should ask how that figure was produced before treating it as comparable to another vendor’s claim.

Best Catch-All Email Verifier: What to Actually Look For

The search for a catch-all email verifier worth trusting comes down to a short checklist. Does it offer a deeper resolver pass on catch-all and risky results, rather than stopping at a flat label? Does it retry complex domains before giving up? Does it disclose what its accuracy figure actually covers?

A tool that answers yes to all three is doing more real work than one that returns a single confident-sounding percentage. Easy bulk verification on top of that is a bonus, not a substitute.

Quick Checklist: Before You Trust an Accuracy Number
What a Confident-Sounding Number Can Hide

A test built and graded by the company selling the product carries an obvious conflict of interest. A confident-looking number can still hide how the hardest status, catch-all, was actually scored.

Reading Test Results With the Right Skepticism

Any published numbers deserve a second look before they get repeated as fact. A result built on a small, narrow sample does not generalize to every list, every industry, or every region.

Reading them with the right skepticism means checking the sample size, the ground truth method, and whether catch-all addresses were scored separately or folded into the total. Limitations and bias show up in every accuracy test, including the ones vendors run on their own tools.

Independent Testing Carries More Weight

An independent test, with a disclosed sample and a reproducible method, is worth more than a vendor’s own number, no matter how high that number looks.

Email Verifier Benchmark: What ReachStream Publishes Today

The email verifier benchmark ReachStream publishes today is the 99.8% verification accuracy figure, confirmed as of November 2026, covering SMTP-level checks run at scale across all seven result statuses.

ReachStream has not published a separate, standalone catch-all accuracy study with its own sample size and ground truth breakdown. Until it does, the honest answer on catch-all specifically is that it gets a deeper resolver pass rather than a single confident number.

Run Your Own List Through the Same Checks

The only way to know how a verifier handles your own list is to run it. Start a free trial and see how ReachStream Email Verifier scores your valid, invalid, risky, and catch-all addresses.

Conclusion

An email verification accuracy test is only as good as its ground truth, its sample size, and its willingness to separate easy statuses from hard ones like catch-all.

ReachStream’s published 99.8% verification accuracy is a real, confirmed figure, but it is an aggregate rather than a catch-all-specific study. Treating catch-all results with a dedicated resolver pass, instead of one flat number, is the more honest path either way, and it ties directly back to the role email validation plays in a healthy B2B list.

Pick the Plan That Fits Your Testing Volume

See how ReachStream Email Verifier combines SMTP-level checks, multi-attempt verification, and the Catch-All Resolver, then pick the plan that fits how many addresses your team tests each month.

Frequently Asked Questions

How accurate is catch-all email verification?

Catch-all email verification is more difficult than checking valid or invalid addresses because the server accepts emails even when a specific mailbox may not exist. ReachStream Email Verifier publishes 99.8% overall verification accuracy. Its separate Catch-All Resolver takes a closer look at these addresses and identifies whether they are likely deliverable or likely invalid.

To test an email verifier, compare its results with confirmed outcomes for a sample of email addresses. These outcomes can come from actual delivery attempts or previously confirmed contacts. A reliable test also measures false positives and false negatives separately to show how often the tool makes mistakes.

Catch-all domains are difficult to verify because their mail servers accept messages sent to any address, whether the mailbox exists or not. This makes it difficult to confirm whether a specific person can receive the email. A standard verification check can identify server acceptance, but it cannot confirm that the address belongs to an active inbox.

A false valid occurs when an email verifier marks an address as valid, but the message later bounces or fails to reach the intended inbox. The opposite is a false invalid, where a working email address is incorrectly marked as invalid. Both errors matter when measuring email verification accuracy.

There is no separately published ReachStream catch-all accuracy study with a disclosed testing method or sample size. Generally, ground truth is established through actual email delivery attempts or confirmed inbox access. ReachStream’s published 99.8% accuracy figure covers overall verification results, not catch-all addresses alone.

The 99.8% accuracy figure is published by ReachStream and is not part of an independent comparative study. Like any vendor-reported result, it should be considered alongside the testing methodology and supporting evidence. Independent testing with a clear sample size and repeatable process provides a stronger basis for comparison.

An unknown or catch-all result indicates that the verifier could not confirm whether an address is deliverable. It does not necessarily mean the address is invalid. However, when measuring coverage, unresolved results represent addresses without a confirmed outcome. This is why accuracy and coverage should be measured separately.

You can apply the same general testing approach to your own email list. Start with a sample of addresses, compare the verification results with known delivery outcomes, and record any false valid or false invalid results. Since ReachStream has not published a separate catch-all benchmark, there are no specific catch-all test results to reproduce.

ReachStream’s published verification accuracy is 99.8%, but there is no publicly disclosed testing schedule or update frequency for this figure. The company has also not published a separate catch-all accuracy benchmark. Readers should refer to the latest product information for current accuracy claims.

Mohammed Younus
Mohammed Younus

Author

Mohammed Younus
Mohammed Younus

Mohammed Younus is the Senior Manager of Business Operations with a keen insight into the B2B landscape. Through his contributions to this blog, he aims to share cutting-edge tactics and insights that empower sales and marketing professionals to achieve unparalleled success.

Share
Table of Contents

A headline accuracy number only tells part of the story. Run your own list through ReachStream Email Verifier to see where it actually stands.

Score Your List Before You Trust a Headline Number
Mohammed Younus
Mohammed YounusAuthor
Mohammed Younus is the Senior Manager of Business Operations with a keen insight into the B2B landscape. Through his contributions to this blog, he aims to share cutting-edge tactics and insights that empower sales and marketing professionals to achieve unparalleled success.

Don't forget to share this post!

Check out our other blogs!

Leave a Reply

Your email address will not be published. Required fields are marked *